BFC Cyclone Condensing water heaters
A BFC Cyclone
BFC Cyclone is a fully room-sealed condensing high-efficiency water heater (97% gross). Flexible flue options allow this water heater to be placed almost anywhere. This water heater is fitted with an automatic gas/air premix burning system including burner modulation. BFC Cyclone is standard delivered with low-maintenance powered anodes. Features BFC Cyclone
- Fully room-sealed condensing high-efficiency water heater 97% (gross)
- Automatic gas/air premix burning system including burner modulation
- Delivered with low-maintenance inert anodes
- NOx emission ≤ 30 ppm (dry – air free) – NOx class 5
- Whisper quiet operation (<45 dB(A) at 2m distance from duct)
- Varying water temperature setting from 40°C to 80°C with use of week timer
- Flexible flue options (maximum length 100m) allow installations to be placed almost anywhere
- Easy fault diagnosis and computer controlled digital week timer
- Programmable for legionella purge cycle
- Voltage-free contact for general fault indication to BMS
- BMS interface for easy connection to a building management system, learn more...
- The BFC cyclone is suitable for combining hot water and heating, learn more...
A Twister
35kW available from stock till further notice. Go to Twister II for the 45kWTwister is a fully room-sealed condensing high-efficiency water heater (95% gross). Plug-and-Play technology; connect air inlet, exhaust outlet, water, electricity, and gas, set the temperature and the system functions properly. Features Twister
- Stainless steel tank: no anodes simplify maintenance
- Premix Low-NOx burner is environmentally friendly
- Whisper quiet operation because of specially designed blower and burner
- Plug-and-Play technology; connect air inlet, exhaust outlet, water, electricity, and gas, set the temperature and the system functions properly
- Easy to install because of the relatively low weight of the appliance (70/82 kg)
- Three external LED lights indicate operational status of water heater
- Suitable for natural gas and propane
- Full serviceability from the front
- Very suitable for agricultural applications
A Twister II
Twister is a fully room-sealed stainless steel condensing high-efficiency water heater (93% gross). Plug-and-Play technology; connect air inlet, exhaust outlet, water, electricity, and gas, set the temperature and the system functions properly. Characteristics Twister
- Fully room-sealed condensing high-efficiency water heater (93% gross)
- Stainless steel tank; no anodes simplify maintenance
- Premix Low-NOx burner saves the environment
- Whisper-quiet operating noise delivered by specially designed blower and burner
- Easy-to-use graphic LCD touchscreen display
- Plug-and-Play technology; connect air inlet, exhaust outlet, water, electricity, and gas, set the temperature and the system functions properly
- Quick and easy installation
- Full serviceability from the front
A Innovo
The Innovo range consists of 9 condensing room-sealed gas water heaters with a capacity ranging from 11.7 to 31.3 kW and a volume of 160 to 380 litres. A load profile between XL and XXL can be attained depending on the appliance, while the ErP efficiency varies between 90 and 94%. The entire range has a maximum temperature setting of 85°C, and with a NOx output of under 37 mg/kWh, it complies perfectly with the strictest European guidelines. Features Innovo
- Fully room-sealed condensing high-efficiency water heater
- Automatic gas/air premix burning system
- Delivered with low-maintenance inert anodes
- Efficiency 98% (gross)
- Flexible flue option allows installations to be placed almost anywhere
- Construction of the heat exchangers limits scaling effect
- External on-/off-switch
- Voltage-free contact for general fault indication to BMS
- Maximum set point of 85°C
- Easy access for maintenance and service; all components are accessible through the front cover
- Completely insulated, low standby losses
- Suitable for plastic flue material
- Suited for natural gas and butane/propane
A Instano
The Instano range consists of three instantaneous water heaters with a capacity of 27.0 kW to 60.9 kW. This appliance can meet a load profile of XL to XXL and has an ErP efficiency of 88% to 92%. The compact dimensions and low weight make it the perfect hot water solution for application in larger households. Features Instano
- Maximum working pressure 10 bar
- Energy efficient, modulating burner
- High-efficiency 107% (gross)
- Stainless steel heat exchangers
- Low NOx
- Maximum set point 75°C
- Equipped with a LCD display with stand-by option
- Displays water temperature, self-diagnostics of components and options
- Electronic ignition
- Small foot print and easy to handle due to low weight
- Room-sealed product
- Suitable for natural gas and propane
