Innovo
Below you will find a download to Autocad drawings per unit.
Below you will find a download to the REVIT drawings (RFA) and the Open Source drawings (IFC) per unit.
Below you can download our CE certificates or other certificates and/or declarations that may apply to the product.
Below you can download the energy label of each water heater. This label shows the efficiency per device.
Please find below flue parts information per unit. Each document contains all necessary information on configuration, parts and assembly.
Below you will find Instruction Manuals with information about the installation, commissioning and maintenance of your installation.
Please find below all information on the parts and accessories that are available for each water heater.
Here you can download the product cards per device.
Below you can download our spec sheets. These sheets contain all possible information regarding technical specifications such as the load profile, input, draw-off capacity, dimensions and installation options.
Innovo
The Innovo range consists of 9 condensing room-sealed gas water heaters with a capacity ranging from 11.7 to 31.3 kW and a volume of 160 to 380 litres. A load profile between XL and XXL can be attained depending on the appliance, while the ErP efficiency varies between 90 and 94%. The entire range has a maximum temperature setting of 85°C, and with a NOx output of under 37 mg/kWh, it complies perfectly with the strictest European guidelines.
Features Innovo
- Fully room-sealed condensing high-efficiency water heater
- Automatic gas/air premix burning system
- Delivered with low-maintenance inert anodes
- Efficiency 98% (gross)
- Flexible flue option allows installations to be placed almost anywhere
- Construction of the heat exchangers limits scaling effect
- External on-/off-switch
- Voltage-free contact for general fault indication to BMS
- Maximum set point of 85°C
- Easy access for maintenance and service; all components are accessible through the front cover
- Completely insulated, low standby losses
- Suitable for plastic flue material
- Suited for natural gas and butane/propane
Advantages
- Maximum set point of 85°C
- Easy access for maintenance and service; all components are accessible through the front cover
- Suitable for plastic flue material
Ecodesign specifications
| Innovo | Load profile | Energy efficiency class | Energy efficiency |
| 12-160 | XL | A | 92% |
| 20-160 | XL | A | 92% |
| 12-200 | XL | A | 94% |
| 20-200 | XL | A | 91% |
| 24-245 | XL | A | 92% |
| 32-245 | XL | A | 92% |
| 24-285 | XL | A | 91% |
| 32-285 | XL | A | 90% |
| 32-380 | XL | A | 90% |
Service
As a manufacturer of high-end appliances A.O. Smith claims to maximize user convenience and comfort. Therefore, we must be able to support and guarantee that our products run impeccably.
Customer satisfaction throughout the service life of our products, that´s A.O. Smith´s promise.
By offering a comprehensive range of services (such as sizing, commissioning, service and maintenance) A.O. Smith validates that promise.
FAQ
For the delivery time of this product, it is best to contact our distributor, they can help you with this
We recommend carrying out annual maintenance. More information about this can be found in the manual. We can assist with this maintenance, please contact our technical department.
You can consult SmartSize. With this you can dimension a hot water system. You can always contact our Sales Engineers, they are happy to help you with this.
In the Discontinued products you will find the information that is available about products that are no longer in production
You can consult the parts list on the product page or download our full Maintenance & Accessories guide. Service parts are shaded yellow.
